Antiscalant for RO Membrane (acid 1.10)

▲ Broad-spectrum reverse osmosis antiscalant, with good antiscaling effect and wide application range, can play a good antiscaling and dispersing effect on conventional water quality;

▲ Effectively control inorganic scaling in a wide concentration range, and the LSI allowable value does not exceed 3.0 without adding acid;

▲ It does not condense with iron-aluminum oxides and silicon compounds to form insoluble substances, and can be used for reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes;

▲ Exlen antiscalant has good solubility and stability;

▲ The pH value of the water supply is effective within the range of 5-10.

Calculate a suitable dosage concentration based on the water quality analysis report and system conditions. Generally, the dosage concentration of reverse osmosis membrane antiscalant is 2-6ppm, which is diluted 10 times with desalted water.

▲ Acidic antiscalant is added before the safety filter;

▲ Calibrate the actual output of the metering pump;

▲ When preparing the liquid, stir it thoroughly for 15-20 minutes;

▲ Clean the medicine adding box regularly to prevent bacterial growth.

1) Packed in plastic barrels, 25kg or 20kg/barrel;

2) Exlen scale inhibitor has stable physical and chemical properties and can be stored in a cool place for 2 years.

EN-170 reverse osmosis membrane antiscalant (acid 1.10), pay attention to labor protection during operation, avoid contact between acid antiscalant and skin, eyes, etc., and rinse with plenty of water after contact.