Reverse Osmosis Membrane Cleaning Agent

EQ-501 is a liquid formula with low PH value, itis used to remove metal hydoxcide, calcium carbonate and othertypes of saline scale. It is applied to aromatic polyamide membranes, hollow fiber membranes, nanofiltration (NF)and ultrafiltration (UF); it can prolong the operation time of membranes.

DOSAGE
Calculate the proper dosage based on the water quality analysis report and the membrane system. Usually it is added into the
rinsing box and dosage is 2-4%.

^{CLEANING INSTRUCTION}
mponents and cause of such contamination must be basically clarified,Before cleaning, the contamination type of RO membrane coand take basically appropriate measures;
The technical staff should recommend appropriate dosage based on the water quality and the process features, and get the besteffect through making adjustment on spot, the usual dosageis 4-10ppm;
shall always remain within the required temperature scope (25~ 35°C);In the cleaning process, the temperature of cleaning solutionnembrane manufactures or agent supplier. In addition, the flow andAdopt the recommended flow value of cleaning solution by rnembrane components and severity of contamination (if there is nosoak time shall be determined by the contamination type of r
ide guidance based on the actual situation.)
recommended value, the technical engineer of Exlen can prov
pendently to achieve the most ideal effect. If the solution becomesEach stage of the multistage RO system shall be cleaned indeturbid or pH value exceeds the recommended range, we shouild formulate new cleaning solution or add detergent. Before puttinginto use, the system must be flushed with water produced byRO.